We ship free of charge to Germany


Your Cart is Empty

BRAKE CALIPER PAINT: The high-quality paint for a longer service life of your brake calipers

  • sporty look of the caliper
  • very high resistance to brake dust, chemicals, salt, fuel and harsh weather conditions
  • Corrosion-resistant, anti-corrosion, resistant to gasoline and brake fluid
  • The spray provides a special racing look quickly and easily
  • the quality paint is heat-resistant up to 300°C and has very good adhesion
  • Colours: red RAL 3002 blue RAL 5002 yellow RAL 1021 black gloss

Our SDV Chemie BRAKE CALIPER PAINT is a high-quality paint specially developed for brake calipers. It offers excellent durability and resistance to heat and moisture, helping to extend the life of your brake calipers. The paint is available in a wide range of colors and allows you to paint your calipers in the color of your choice.

The SDV Chemie BRAKE CALIPER PAINT is very easy to apply and does not require any special knowledge or skills. A single coat is enough to achieve an even and high gloss finish. The lacquer is heat and moisture resistant and will not fade or peel, even at high temperatures.

This varnish is also very fast drying, allowing you to quickly remount and use your calipers. no clear coat is required.

* heat resistant up to 300°C
* Excellent adhesion to many surfaces
* very easy processing
* perfect repair paint
* Can be used on new and old paintwork
* fast drying
* high opacity
* scratch resistant
* abrasion resistant

* protects against rust
* universally applicable
* weather resistant
* high yield

Technical specifications:
Storage temperature: in a dry and cool place -5°C to +30°C

The substrate must be dry, oil-free, grease-free, clean, free of rust and loose adhesions. Treat heavily corroded metal substrates with SDV Chemie ROSTUMCONVERTER before painting. Bring the can to room temperature (16 - 20°C), shake vigorously (after the mixing balls can be heard rattling for about 2 minutes) - test spray and check for compatibility with the substrate. Spray on crosswise from a distance of 20 - 25 cm in two to three thin, intermediately dried layers. The paint dries quickly: the surface is dry after approx. 8 minutes, touch-dry after 20 to 30 minutes, and the paint is hardened after approx. 24 hours. Best processing at approx. 20°C. Pay attention to opaque paintwork. If necessary, repeat the painting process. Allow 20 to 30 minutes to dry before applying the second coat.

customer reviews

Based on 1 review Write a review